Bilovit Pine Sauna Thermometer with Hygrometer - up to 120 degrees Celsius

Bilovit Pine Sauna Thermometer with Hygrometer shows temperature from 0 to 120°C and humidity from 0 to 100% at the same time on two large dials. The housing is made of pine wood and the device mounts to the wall at the back. Without these two readings, a sauna session is guesswork.

About the product

Temperature alone does not tell you how a session will feel. What matters is how it combines with humidity. 90°C in a dry Finnish cabin feels very different from 60°C at high humidity, because humid air transfers heat much faster.

This model shows both values side by side on two large dials that stay easy to read even in steam. The housing is made of pine wood, which heats up more slowly than metal, so you can take the device off the wall without waiting for the cabin to cool down.

Specification

• Temperature range - 0-120°C
• Humidity range - 0-100%
• Height - 14 cm
• Width - 26 cm
• Thickness - 3 cm
• Mounting - rear mounting
• Material - pine wood

Intended use

For home and commercial saunas, to monitor the conditions inside the cabin. Particularly useful where several people share one sauna and prefer different temperature and humidity levels.

How to use

1. Mount the device on the wall in the middle part of the cabin, at a height of about 150 cm. Close to the heater the reading will be too high, and near the floor too low.
2. Wait a dozen or so minutes after the sauna has heated up, until the readings stabilise.
3. Read both values together, as it is their combination that determines how the session feels.

Care

Wipe with a dry, soft cloth. Avoid detergents and do not pour water over the device.

Material

Pine wood, glass.